Threaded Mode | Linear Mode

Forum Builder · 10-17-2011, 10:29 PM

Machine Model Number - unknown

Machine part number, found on silver sticker
(e.g. 1.***-***.0) - unknown

Type of Enquiry - Enquiry on Parts

Message
I have a cold water Karcher pressure washer(about 10 years old) that is in Turkey and I have no model no.

I am after a water inlet filter.

If it helps I can send you the old one that has no gauze in it so you can match the part,

Sorry to be so vague!

Steve Perkins · 10-17-2011, 10:29 PM

is this a domestic machine?

Forum Builder · 10-17-2011, 10:30 PM

Yes it is.

Thanks for your quick response.

Steve Perkins · 10-17-2011, 10:31 PM

ok, can you tell me if the filter fitted inside the in let manifold on your machine or did it screw on to the front of the machine?

Forum Builder · 10-17-2011, 10:32 PM

it fitted inside the inlet manifold immediately behing the hose connector.
It is cylindrical, about 54mm long and 13mm diameter with a slightly wider neck at one end to keep it in place.

Hope this helps

Steve Perkins · 10-17-2011, 10:32 PM

http://www.cleanstuff.co.uk/cgi-bin/ss00...PR=-1&TB=A

the link will take you to the part needed

steve

vim · 03-01-2012, 03:16 AM

Need Help, I have K480 jet washer, the inlet in the front has snapped off at the bend, I have ordered new part, but concern I may have not ordered all the necesary parts, can you help?

Steve Perkins · 03-01-2012, 03:43 AM

Hi, part number needed is 9001187 noting more

steve

vim · 03-01-2012, 04:09 AM

How easy is it to change?

Steve Perkins · 03-01-2012, 04:23 AM

yes, once the metel caseing is off it will be no problem< see my pm for more detail

steve